Products Details
Low Temperature Refining Agent
Category:
Parameters
2029A 85°C Pre-treatment process is superior to the conventional process in the market with the following features:
i. There is no need to add anti-wrinkle agent, chelating and dispersing agent, hydrogen peroxide stabiliser, CT powder, etc. to the production. ii, 2029A already has the above product features and has strong degreasing, calcium saponification and chelating and dispersing ability.
Secondly, 2029A has strong emulsifying ability and refining effect, and has good ability to remove lignin, ash and cottonseed husk in cotton fibre.
Third, the treatment ensures the whiteness and brightness of the bleached cloth base, which gives a good guarantee for dyeing vividness and dyeing rate.
Four, because it is 85 ° C treatment, shorten the heating time, reduce the amount of steam, especially for some factories with insufficient steam, can effectively complete the pre-production treatment process faster, conducive to production operations.
Fifth, because of the 85 ° C treatment, for easy to crease varieties, avoid the easy to produce creases in the temperature stage, and between 85 ° C - 60 ° C to control the crease is easy to operate, greatly reducing the chances of producing creases.
Sixth, low temperature 85 ° C pre-treatment, for products containing spandex, humidity and heat conditions are mild, spandex strength decline is not obvious, the overall strength of the cloth can be guaranteed compared with the conventional high temperature 100 ° C * 60 min process can be maintained to reduce the strength of the effect of 30-50N.
Seven, low-temperature 85 ° C pre-treatment, mild production conditions, process time is short, but also reduces the loss of cotton fibres in the production process, easy to ensure that the product in the process of low loss rate.
Product Description
Physical Indicators
Appearance: blue liquid
Ionicity: anionic
PH value: 6-7 (1% aqueous solution)
In view of the current environmental protection trend of energy saving and emission reduction, in order to further improve and optimize the pretreatment processing of cellulosic fibre, especially in the processing of spandex-containing T/C, CVC cotton, etc., taking into account that the needle structure and spandex filaments due to the decline in the strength of the humidity and heat of the product led to a substantial decline in the top breaking force and other factors, the Company launched 2029A low-temperature refiner to solve the implementation of the 85 ° C pre-treatment of the boiling and bleaching process, while ensuring the whiteness and gross efficiency of product processing, shorten the process time, reduce strength and gross efficiency. In order to ensure the whiteness and gross efficiency of product processing, shorten the process time, reduce the decline in strength, reduce the crease and scratch marks to be blemishes to produce the opportunity, the specific process is as follows:
First, dark-coloured varieties:
caustic soda: 1%
2029A: 2%
H2O2 (27.5%): 6-8%
85 ° C * 60 minutes
Second, light, bright-coloured varieties:
caustic soda: 1%
2029A: 2%
H2O2 (27.5%) 8-10%
85°C*60min
iii. White varieties:
Caustic soda: 1% (specific dosage to be adjusted according to whiteness requirements)
2029A: 2%
H2O2(27.5%): 12%
85°C*60 minutes
2029A 85°C Pre-treatment process is superior to the conventional process in the market with the following features:
i. There is no need to add anti-wrinkle agent, chelating and dispersing agent, hydrogen peroxide stabiliser, CT powder, etc. to the production. ii, 2029A already has the above product features and has strong degreasing, calcium saponification and chelating and dispersing ability.
Secondly, 2029A has strong emulsifying ability and refining effect, and has good ability to remove lignin, ash and cottonseed husk in cotton fibre.
Third, the treatment ensures the whiteness and brightness of the bleached cloth base, which gives a good guarantee for dyeing vividness and dyeing rate.
Four, because it is 85 ° C treatment, shorten the heating time, reduce the amount of steam, especially for some factories with insufficient steam, can effectively complete the pre-production treatment process faster, conducive to production operations.
Fifth, because of the 85 ° C treatment, for easy to crease varieties, avoid the easy to produce creases in the temperature stage, and between 85 ° C - 60 ° C to control the crease is easy to operate, greatly reducing the chances of producing creases.
Sixth, low temperature 85 ° C pre-treatment, for products containing spandex, humidity and heat conditions are mild, spandex strength decline is not obvious, the overall strength of the cloth can be guaranteed compared with the conventional high temperature 100 ° C * 60 min process can be maintained to reduce the strength of the effect of 30-50N.
Seven, low-temperature 85 ° C pre-treatment, mild production conditions, process time is short, but also reduces the loss of cotton fibres in the production process, easy to ensure that the product in the process of low loss rate.
Storage And Transport
1. in polyethylene plastic drums, lined with plastic bags, 125kg per drum.
2. Store in cool, dry and ventilated warehouse; shelf life of 6 months.
Tag list： Low Temperature Refining Agent
About Jin Dong
Jindong Technology (Foshan) Co., Ltd.
Jindong Technology (Foshan) Co., Ltd. was established in August 2013, initially mainly engaged in textiles Production of raw materials for weaving auxiliaries and daily chemical series products. Since 2016, I have been an independent student in the new factory area. It is in operation and production, covering an area of approximately 20 r. It has complete environmental assessment and safety inspection procedures and no flammable or explosive hazards Insurance products, with an annual output value scale of up to 100 million yuan, in 2019. It was consecutively rated as a provincial product in 2022 High-tech enterprise, it was rated as a provincial specialized, refined, distinctive and innovative enterprise in December 2022.
✅ 35+ Patents, Strong Innovation:
35 utility models + 2 invention patents (pending). Continuous tech upgrades ensure high-performing products.
✅ One-Stop Solutions = Save Cost & Time:
R&D, production, tech support all-in-one service to cut costs & boost efficiency.
✅ Gov-Certified Quality + Digital Control:
Provincial-certified Hightech & "Specialized" company. ERP system ensures standardized quality.
✅ 6-Province Local Teams = Fast Support:
On-site teams in 6 provinces. Quick customized solutions via online/offline channels.
Frequently Asked Questions
Which industries use your products?
What demonstrates its technical capabilities?
How has the company evolved?
What certifications does the company hold?
What are the key products?
When was the company founded? What is its core business?
Category:
Parameters
2029A 85°C Pre-treatment process is superior to the conventional process in the market with the following features:
i. There is no need to add anti-wrinkle agent, chelating and dispersing agent, hydrogen peroxide stabiliser, CT powder, etc. to the production. ii, 2029A already has the above product features and has strong degreasing, calcium saponification and chelating and dispersing ability.
Secondly, 2029A has strong emulsifying ability and refining effect, and has good ability to remove lignin, ash and cottonseed husk in cotton fibre.
Third, the treatment ensures the whiteness and brightness of the bleached cloth base, which gives a good guarantee for dyeing vividness and dyeing rate.
Four, because it is 85 ° C treatment, shorten the heating time, reduce the amount of steam, especially for some factories with insufficient steam, can effectively complete the pre-production treatment process faster, conducive to production operations.
Fifth, because of the 85 ° C treatment, for easy to crease varieties, avoid the easy to produce creases in the temperature stage, and between 85 ° C - 60 ° C to control the crease is easy to operate, greatly reducing the chances of producing creases.
Sixth, low temperature 85 ° C pre-treatment, for products containing spandex, humidity and heat conditions are mild, spandex strength decline is not obvious, the overall strength of the cloth can be guaranteed compared with the conventional high temperature 100 ° C * 60 min process can be maintained to reduce the strength of the effect of 30-50N.
Seven, low-temperature 85 ° C pre-treatment, mild production conditions, process time is short, but also reduces the loss of cotton fibres in the production process, easy to ensure that the product in the process of low loss rate.